How do I restore Amulet OS for my monochrome GUI?
If your module has a touch panel, follow the steps below:
- Go to File > Restore Amulet OS. Choosing this menu option opens the latest Amulet OS and then starts programming it into the Amulet's serial data flash.
- First load the file AmuletOSv3.3.5.uht from the \binaries\ subdirectory of the Amulet main directory. By default, the Amulet main directory is C:\Program Files\Amulet, however you may have specified a different path during the install.
- If the Amulet is currently "dead", put the Amulet module in program mode (DIP switch 1 to OFF in the 5.7" or remove the Boot M jumper in the 3.8") and hit the reset button.
- Next, program the file into Amulet Flash. After the OS is successfully loaded, the touchpanel calibration routine will appear. Before running the calibration routine, you must put the Amulet back in normal mode (DIP switch 1 to ON in the 5.7" or reinstall the Boot M jumper in the 3.8") After successfully calibrating the touchpanel, a screen allowing the setting of the display polarity appears. Hit the button to the right to toggle the display polarity.
Please login or Register to submit your answer